产品中心
新闻动态 当前位置:首页>新闻动态>新闻动态

检查井钢模具属于常用的预制件模具

网址:www.shuntianxincai.com  2022-06-10  作者:admin    阅读:

检查井钢模具属于常用的预制件模具,在生产过程中会根据检查井的规格尺寸来选择钢板的厚度,如果检查井的规格偏小,比如内径为50公分或者70公分的井体,可以选用3mm的钢板来生产,这样做出来的模具产品轻巧便捷,质量也绝对没问题。但是如果生产尺寸较大的检查井,比如内径为1.5米或者还大的井体就必须采用5mm的钢板了,如果钢板太薄的话就没办法保证质量了,所以钢板厚度的选择要看检查井的规格大小。
Inspection well steel mold is a kind of commonly used prefabricated parts mold. In the production process, the thickness of steel plate will be selected according to the specification and size of inspection well. If the specification of inspection well is too small, such as the well body with inner diameter of 50 cm or 70 cm, 3 mm steel plate can be used for production. The mold products made in this way are light and convenient, and the quality is absolutely no problem. However, if the production of larger inspection wells, such as the inner diameter of 1.5 meters or larger well body, 5mm steel plate must be used. If the steel plate is too thin, there is no way to ensure the quality, so the selection of steel plate thickness depends on the size of the inspection well.
在生产过程中,检查井模具外模和内模都假山制作 不锈钢铸件 铝箔真空袋 七孔梅花管 hdpe硅芯管 液压钢坝 PVC软管 飞行激光打标机 沥青保温泵是分开做的,外模一般分成两片,因为这个是螺丝固定的,拆模很方便。内模一般做成三片,其中两片是一样的都是弧形的,另一片则做成梯形弧形的,这样有利于迅速拆模。在制作水泥件之前,模具的内部如果刷一层油的话,更有利拆模速度。
In the production process, the outer mold and the inner mold of the inspection well mold are made separately. The outer mold is generally divided into two pieces, because this is fixed by screws, so it is convenient to remove the mold. The internal mold is generally made of three pieces, two of which are the same, both arc-shaped, and the other is made of trapezoidal arc, which is conducive to the rapid removal of formwork. Before making cement parts, if a layer of oil is applied on the inside of the mold, it is more favorable for the removal speed.

返回新闻

网站出租电话
13313028229